[vc_row full_width=”stretch_row”][vc_column width=”1/2″][sliding_box image=”141″ title=”XTREM H07RN-F”][vc_column_text]Top Cable Xtrem H07RN-F cables are designed to supply power to low voltage appliances including electric motors and submersible pumps in deep water installations as well as many other types of electrical equipment.
[popup title=”DETAILS” padding=”0″ button=”1″]
Top Cable Xtrem H07RN-F cables are designed to supply power to low voltage appliances including electric motors and submersible pumps in deep water installations as well as many other types of electrical equipment.
Due to its extraordinary flexibility and mechanical strength, the Xtrem H07RN-F cable is ideal for power transmission in both fixed installations or mobile services. This cable has been manufactured using compounds which have much better behaviour than the ones specified in the standards, which makes it a versatile cable with a higher service temperature and voltage than those indicated in international standards. Nominal voltage up to 1000 V possible thanks to the high dielectric properties of the insulation material (according to HD 516).
DESIGN
Conductor: Electrolytic copper, class 5 or 6 (flexible), based on EN 60228
Insulation: Thermosetting rubber (type EI4).
The standard identification is the following:
1 x Natural
2 x Brown + Blue
3 G Brown + Blue + Yellow/green
4 G Brown + Black + Grey + Yellow/green
5 G Brown + Black + Grey + Blue + Yellow/green
6G or more … Black numbered + Yellow/green
Outer sheath: Thermosetting rubber (type EM2). Black colour.
Pakaging: In drums. Also available in rolls (lengths of 50 and 100 m)
National norm / european: EN 60332-1
International norm: IEC 60332-1
ITC: 29/30/31/32/33/34/41/42
[/popup][/vc_column_text][/vc_column][vc_column width=”1/2″][sliding_box image=”140″ title=”POWERFLEX RV-K”][vc_column_text]The POWERFLEX RV-K low voltage cable is suitable for all types of low voltage industrial-type connections, in urban grids, building installations, etc.
[popup title=”DETAILS” padding=”0″ button=”1″]
The POWERFLEX RV-K low voltage cable is suitable for all types of low voltage industrial-type connections, in urban grids, building installations, etc.
The high flexibility of this electric cable makes the installation process substantially easier and, as a result, it is particularly suitable for use in difficult layouts. This low voltage cable can be buried or installed in a conduit, as well as in open air without requiring additional protection. Lastly, the Powerflex RV-K cable can withstand damp conditions including total immersion in water.
DESIGN
Conductor: Electrolytic copper, class 5 (flexible), based on UNE/EN 60228
Insulation: XLPE.
The standard identification is the following:
1 x Natural
2 x Blue + Brown
3 G Blue + Brown + Yellow/green
3 x Brown + Black + Grey
3 x + 1 x Brown + Black + Grey + Blue (reduced cross-section)
4 G Brown + Black + Grey + Yellow/green
4 x Brown + Black + Grey + Blue
5 G Brown + Black + Grey + Yellow/green + Blue
Outer sheath: Flexible PVC outer sheath, White and Black colour
Packaging: Available in rolls (100 Yard)
National norm / european: EN 60332-1
International norm: IEC 60332-1
ITC: 9/20/30
[/popup][/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][sliding_box image=”138″ title=”TOXFREE ZH”][vc_column_text]The halogen-free Toxfree ZH RZ1-K (AS) / DZ-K low voltage cable is a high safety cable. In case of fire, it does not emit toxic or corrosive gases, thereby protecting public health and avoiding any possible damage to electronic equipment.
[popup title=”DETAILS” padding=”0″ button=”1″]
The halogen-free Toxfree ZH RZ1-K (AS) / DZ-K low voltage cable is a high safety cable. In case of fire, it does not emit toxic or corrosive gases, thereby protecting public health and avoiding any possible damage to electronic equipment.
For this reason, its use is recommended in public places such as: hospitals, schools, museums, airports, bus terminals, shops in general, tunnels, metros, etc., as well as in computer centres, offices, production plants, laboratories, etc.
DESIGN
Conductor: Electrolytic copper, class 5 (flexible), based on EN 60228
Insulation: XLPE. / LZHF Rubber
The standard identification is the following:
1 x Natural
2 x Blue + Brown
3 G Blue + Brown + Yellow/green
3 x Brown + Black + Grey
3 x + 1 x Brown + Black + Grey + Blue (reduced cross setcion)
4 G Brown + Black + Grey + Yellow/green
4 x Brown + Black + Grey + Blue
5 G Brown + Black + Grey + Yellow/green + Blue
Outer sheath: LSZH outer sheath. Green / Black colour, non-toxic and fire retardant.
Packaging: Available in drums and rolls (lengths of 50 and 100 m).
National norm / european: UNE-EN 60332-1 / UNE-EN 60332-3 / UNE-EN 50267-1 / UNE-EN 50267-2 / UNE-EN 61034
International norm: IEC 60332-1 / IEC 60332-3 / IEC 60754-1 / IEC 60754-2 / IEC 61034
[/popup][/vc_column_text][/vc_column][vc_column width=”1/2″][sliding_box image=”139″ title=”TOPWELD H01N2-D”][vc_column_text]The Topweld H01N2-D cable has been specially designed for transmitting high currents between the welding generator and the electrode. The high degree of flexibility makes using the welding tool easier and also keeps knots from forming in the cable, which could cause the internal conductor to break.
[popup title=”DETAILS” padding=”0″ button=”1″]
The Topweld H01N2-D cable has been specially designed for transmitting high currents between the welding generator and the electrode. The high degree of flexibility makes using the welding tool easier and also keeps knots from forming in the cable, which could cause the internal conductor to break.
It can also be used in automatic welding machines, transport belts, and production or assembly lines, such as automobile assembly lines.
DESIGN
Conductor: Electrolytic copper, class D (flexible), based on UNE-EN 50525-2-81
Outer sheath: Thermosetting rubber (type EM5). Black colour.
National norm / european: EN 60332-1
International norm: IEC 60332-1
[/popup]
[/vc_column_text][/vc_column][/vc_row]